Electrical Contracting Company in Dubai
Power and lighting installed neatly, tested fully and documented so the inspection is a formality.
What does an electrical contractor do?
An electrical contractor installs a building's power and lighting: containment, cables, distribution boards, switchgear, light fittings, sockets and earthing. They test every circuit, record the results and prepare the installation for utility inspection and energisation.
Load schedules and single line diagrams come from our electrical consultants. Rooftop PV is covered by solar installation, and standby fuel by fuel oil systems.
Good electrical work is visible in the details: boards that are labelled, cables that are dressed and glanded properly, terminations that are tight. Those details decide whether an installation passes inspection first time and whether it is safe to maintain ten years later. As an electrical contracting company in Dubai we treat them as the job, not as finishing touches.
Our electrical installation scope covers LV panels and distribution boards, cable tray, trunking and conduit, power and lighting circuits, emergency lighting, earthing and lightning protection, generator and UPS connections and EV chargers. Testing includes insulation resistance, continuity, earth loop impedance and RCD operation, with certificates issued for each board.
We act as electrical fit-out contractor for offices and shops in Dubai, and take on villas, warehouses and building upgrades. The service is part of our MEP contracting package, designs come from our electrical consultant team or yours, and low-current systems are installed by ELV contracting. Clients comparing electrical contractors in Dubai are welcome to visit a live site.
What's included
LV panels and distribution boards
Supply, installation, termination and labelling.
Containment and cabling
Tray, trunking, conduit and cables sized to the design.
Lighting and small power
Fittings, sockets, isolators and emergency lighting.
Earthing and lightning protection
Installed and tested to the specification.
Testing and certification
Circuit tests recorded and handed over.
Inspection and energisation support
Preparation for DEWA inspection with the project consultant.
When to call us
You do not need a finished brief. If any of these sounds familiar, let's talk.
- A fit-out needs power and lighting installed to a deadline.
- Boards are overloaded or the installation has failed an inspection.
- You are adding load: a kitchen, server room, EV chargers or new machinery.
How we work
Survey and scope
We inspect the site and agree scope, programme and responsibilities.
Price and plan
You receive an itemised price and a programme tied to your key dates.
Install
Our teams install, coordinate with other trades and keep the site safe and tidy.
Test and hand over
We test, commission and hand over records, then support inspections and maintenance.
Where we work
- Villas and residential
- Offices and commercial buildings
- Hotels and hospitality
- Healthcare
- Warehouses and industrial units
- Mixed-use developments
Trusted by teams across Dubai and the UAE
What clients say
See our Google reviewsReally good experience with Solve Tech Vision. Their MEP calculation work was accurate, and the team was easy to communicate with.
Professional MEP consultants in Dubai. They understood our requirements quickly and provided clear technical support.
Very professional engineering team. Good communication, practical advice, and smooth service from start to finish.
The team was genuinely helpful and responsive. They handled our engineering requirements professionally and made the whole process easy.
Electrical Contracting: questions, answered
Do you handle the DEWA inspection?
We prepare the installation, test records and as-built drawings and attend the inspection alongside the consultant or party registered for the project.
Can you upgrade an old distribution board?
Yes. We survey the existing circuits, plan the changeover to limit downtime, and test everything afterwards.
Do you install EV chargers?
Yes, after checking that the supply and upstream board can take the additional load.
Do you provide electrical maintenance contracts?
Yes, including periodic testing, thermal inspection of boards and fault call-outs.
Do you handle the DEWA connection process?
We prepare the installation and documentation DEWA asks for and coordinate the site inspection, though the connection itself is issued by DEWA once they’re satisfied.
What testing do you carry out before handover?
Insulation resistance, earth continuity, polarity and functional testing on every circuit, with certificates and as-built records provided at handover.
Can you take over a partially completed electrical installation?
Yes, after a site survey to check what’s already in and confirm it’s safe to build on before we continue.
Do you install standby generators and transfer switches?
Yes, including coordination with the fuel oil system where a generator needs one.
Which tests are carried out on a new electrical installation?
Insulation resistance, continuity of protective conductors, earth electrode and earth fault loop impedance, RCD trip times, polarity and phase rotation, and functional checks of every board. Results go on test certificates that DEWA and the building owner keep.
Related services
Electrical Consultant
Load schedules, single line diagrams, cable sizing and lighting design.
Read more
MEP Contracting
HVAC, electrical, plumbing and fire fighting installed, tested and commissioned by one team.
Read more
HVAC Contracting
Chillers, AHUs, FCUs, VRF and ductwork installed, balanced and commissioned.
Read more
Ready to talk about your project?
Call +971 524064300, or send us your drawings and we will reply with next steps.