PLC Contracting and Programming in Dubai
PLC panels built, programmed and commissioned on your process, with the code handed over, not held back.
What is included in PLC contracting?
PLC contracting covers supply of the controller and I/O hardware, building the control panel, writing and testing the program, installing and wiring the panel on site, and commissioning it against the process. Documentation and operator training complete the handover.
Logic and migration plans are prepared by our PLC consultants. Breakdowns go to PLC troubleshooting.
A PLC project is finished when the machine runs through every mode without someone standing by with a laptop. For PLC contracting in Dubai we work towards that from the first day: the program is simulated before the panel ships, I/O is checked point by point on site, and sequences are tested including the fault conditions nobody wants to try.
Our PLC programming services in Dubai use ladder, function block and structured text as the task requires, with tag naming and comments that make the logic maintainable. PLC panel installation includes glanding and termination of field cables, network setup and integration with SCADA and HMI and with drives.
We carry out Siemens and Allen-Bradley PLC programming in the UAE along with Schneider and Mitsubishi platforms, for packaging lines, pump stations, batching plants, chillers and utilities. The work belongs to our industrial automation contracting service; design-only appointments go through our PLC consultant team, and existing systems are covered by PLC troubleshooting.
What's included
Hardware supply
Controllers, I/O, power supplies and communication modules.
Panel building
Assembly, wiring and factory testing.
Programming
Structured, commented code with version control.
Simulation and FAT
Logic proven before delivery.
Site installation
Termination, I/O checks and network setup.
Commissioning and training
Sequence tests, handover and operator training.
When to call us
You do not need a finished brief. If any of these sounds familiar, let's talk.
- A machine or skid needs a new control panel.
- You need a program change and the original programmer is unavailable.
- An obsolete PLC must be replaced with minimal downtime.
How we work
Designed, installed, commissioned and supported: one team across all four stages.
Design
Process study, functional description, panel and network design.
Installation
Panels, drives, instruments and cabling installed and terminated.
Commissioning
I/O checks, sequence tests and performance runs on the live process.
Support
Training, documentation, remote assistance and maintenance after handover.
Where we work
- Manufacturing plants
- Water and wastewater
- Utilities and energy
- Food and beverage
- Building plant rooms
- Oil and gas support facilities
Trusted by teams across Dubai and the UAE
What clients say
See our Google reviewsReally good experience with Solve Tech Vision. Their MEP calculation work was accurate, and the team was easy to communicate with.
Professional MEP consultants in Dubai. They understood our requirements quickly and provided clear technical support.
Very professional engineering team. Good communication, practical advice, and smooth service from start to finish.
The team was genuinely helpful and responsive. They handled our engineering requirements professionally and made the whole process easy.
PLC Contracting: questions, answered
Will we receive the PLC program source?
Yes. The source code, backups and documentation are handed over. It is your system.
Can you modify a running system?
Yes. We back up first, test changes offline where possible, and apply them in an agreed window.
How long does a PLC panel take to deliver?
It depends mainly on hardware lead times. Design and programming run in parallel so the panel is ready for testing as soon as parts arrive.
Do you provide remote support?
Yes, through secure remote access where your IT policy allows it.
Which PLC brands do you work with?
We work with the platform your plant already uses wherever we can, and we can recommend one for new projects based on your team, spare parts and local support. Tell us what you have and we'll confirm before quoting.
Can you fix a PLC program written by someone else?
Usually. We back up the controller, read through the logic and find where it goes wrong. If it is fragile, we explain the options: patch it, tidy it or rewrite the parts that cause trouble.
What do I get at the end of a PLC project?
Commented source code, an I/O list, a functional description, test records and backups, so your team has everything needed to support the system.
Which PLC languages do you use?
We use the IEC 61131-3 languages that suit the job, for example ladder logic for simple interlocks and structured text for calculations and data handling.
Why should we keep a backup of the PLC program?
If a CPU fails or someone changes the logic, the backup is the only way to restore the plant quickly. We hand over the commented source program and a dated backup, and recommend a new backup after every change.
Related services
PLC Consultant
Control logic design, hardware selection, program audits and PLC migration.
Read more
Industrial Automation Contracting
Control systems delivered end to end: design, installation, commissioning and support.
Read more
SCADA Contracting
SCADA servers, HMI panels, networks and reporting configured and commissioned.
Read more
Ready to talk about your project?
Call +971 524064300, or send us your drawings and we will reply with next steps.