SCADA Contracting and HMI Systems in Dubai
SCADA and HMI systems configured, installed and commissioned so operators trust what the screen tells them.
What is included in SCADA contracting?
SCADA contracting covers supply of servers, workstations and HMI panels, software licensing, configuration of screens, alarms, trends and reports, network installation, communication with PLCs and field devices, and commissioning with the operators who will use it.
Architecture and screens are designed by our SCADA consultants. Not sure if you need SCADA at all? Read PLC vs SCADA for facility managers. Pump panel HMI screens are shown on our pumping systems page.
A SCADA screen is only as good as the signal behind it. During SCADA contracting in Dubai we verify every tag from the field device to the display, so a value on screen is a value you can act on. Alarm limits are set with the process team instead of being left at defaults.
SCADA system installation includes server and client hardware, redundancy where specified, industrial switches and fibre, and communication over Modbus, Profinet, Ethernet/IP and OPC UA. HMI programming for local operator panels follows the same graphic standards, and historian and reporting are set up to deliver the daily, shift or compliance reports you actually need.
We act as SCADA system integrator for water and utilities in the UAE and for manufacturing and building plant, within our industrial automation contracting service. Controllers are covered by PLC contracting, architecture and specification by our SCADA consultant team, and going live by our commissioning service.
What's included
Hardware and licences
Servers, workstations, HMI panels and software.
Screen configuration
Process graphics built to an agreed standard.
Alarms and trends
Limits, priorities and history set with operators.
Historian and reports
Automatic production, energy and compliance reports.
Networks and communications
Switches, fibre and protocol gateways.
Commissioning and training
Point-to-point checks and operator training.
When to call us
You do not need a finished brief. If any of these sounds familiar, let's talk.
- A new plant or line needs supervisory control.
- Your SCADA software is out of support and must be upgraded.
- You need remote sites brought into one control room.
How we work
Designed, installed, commissioned and supported: one team across all four stages.
Design
Process study, functional description, panel and network design.
Installation
Panels, drives, instruments and cabling installed and terminated.
Commissioning
I/O checks, sequence tests and performance runs on the live process.
Support
Training, documentation, remote assistance and maintenance after handover.
Where we work
- Manufacturing plants
- Water and wastewater
- Utilities and energy
- Food and beverage
- Building plant rooms
- Oil and gas support facilities
Trusted by teams across Dubai and the UAE
What clients say
See our Google reviewsReally good experience with Solve Tech Vision. Their MEP calculation work was accurate, and the team was easy to communicate with.
Professional MEP consultants in Dubai. They understood our requirements quickly and provided clear technical support.
Very professional engineering team. Good communication, practical advice, and smooth service from start to finish.
The team was genuinely helpful and responsive. They handled our engineering requirements professionally and made the whole process easy.
SCADA Contracting: questions, answered
Which SCADA software do you use?
We work with the leading platforms and with the SCADA packages of the main PLC vendors. The choice follows your existing systems and support preferences.
Can you upgrade SCADA without losing historical data?
Usually. Migration of the historian is planned as part of the upgrade.
Do you replace old HMI panels?
Yes. Obsolete panels are replaced and their applications converted or rebuilt.
Can reports be emailed automatically?
Yes. Scheduled reports can be generated and sent without operator action.
What's the difference between SCADA and HMI?
An HMI is the screen an operator uses at or near a machine. SCADA covers the wider system: many HMIs and PLCs, data logging, alarms, trends and reporting, usually from a central control room.
Can you connect SCADA to our existing PLCs?
Usually yes. We check the PLC models and communication options during a short review, then confirm how the data will be collected before we quote.
Can we view SCADA data remotely?
Yes, where it makes sense. We design remote access with secure connections and user roles instead of leaving systems open to the network.
Can you replace an obsolete SCADA without stopping production?
Usually. We build and test the new system alongside the old one, then plan the changeover for a scheduled window.
How is remote access to SCADA kept secure?
Through a VPN or a secure remote access gateway, separate user accounts with the minimum rights each person needs, and a firewall between the plant network and the office network. We avoid exposing SCADA directly to the internet.
Related services
SCADA Consultant
SCADA architecture, HMI screens, alarms, historian and reporting.
Read more
Industrial Automation Contracting
Control systems delivered end to end: design, installation, commissioning and support.
Read more
PLC Contracting
PLC panels supplied, programmed, installed and commissioned.
Read more
Ready to talk about your project?
Call +971 524064300, or send us your drawings and we will reply with next steps.