Plumbing Contracting Company in Dubai
Water supply and drainage installed to the right falls and pressures, and tested before a single tile goes over it.
What does a plumbing contractor do?
A plumbing contractor installs the pipes and equipment that bring water into a building and take waste out: supply pipework, water tanks, booster pumps, heaters, drainage stacks, manholes and sanitary fixtures. Each system is pressure or flow tested before it is concealed.
Designs are prepared by our plumbing consultants when you need them. Sprinkler and hose reel pipework is covered by fire fighting contracting. Booster, transfer and hot water circulation sets are covered by water pumping systems.
Plumbing is the trade you least want to revisit, because it ends up behind tiles and under slabs. A joint that weeps or a drain laid a little too flat can stay hidden for months. As a plumbing contracting company in Dubai we test in stages: every section of supply pipe is pressure-tested and every drain run is water-tested before it is closed in.
Our scope includes cold and hot water pipework in PPR, copper or PEX, water tanks and booster pump sets, water heaters and solar-assisted hot water, soil, waste and vent stacks, underground drainage and manholes, drainage installation for kitchens with grease traps, and sanitary ware fitting.
We work as plumbing and drainage contractor for buildings in Dubai from villas to towers, labour accommodation, restaurants and industrial units, as part of our MEP contracting service. Designs come from our plumbing consultant team or your own, and sprinkler and hose reel systems are covered by fire fighting contracting. Owners comparing plumbing contractors in Dubai can ask for references from similar buildings.
What's included
Water supply pipework
Cold and hot water distribution, insulated where required.
Tanks and booster pumps
Installed, wired and set to the design pressure.
Drainage and vent systems
Stacks, branches and underground runs laid to fall.
Interceptors and special drainage
Grease traps and oil separators.
Sanitary ware installation
Fixtures, mixers and concealed cisterns.
Pressure and flow testing
Recorded tests before concealment.
When to call us
You do not need a finished brief. If any of these sounds familiar, let's talk.
- You need plumbing installed for a new building or fit-out.
- There are recurring leaks, blockages or pressure problems.
- Pumps or tanks are at the end of their life.
How we work
Survey and scope
We inspect the site and agree scope, programme and responsibilities.
Price and plan
You receive an itemised price and a programme tied to your key dates.
Install
Our teams install, coordinate with other trades and keep the site safe and tidy.
Test and hand over
We test, commission and hand over records, then support inspections and maintenance.
Where we work
- Villas and residential
- Offices and commercial buildings
- Hotels and hospitality
- Healthcare
- Warehouses and industrial units
- Mixed-use developments
Trusted by teams across Dubai and the UAE
What clients say
See our Google reviewsReally good experience with Solve Tech Vision. Their MEP calculation work was accurate, and the team was easy to communicate with.
Professional MEP consultants in Dubai. They understood our requirements quickly and provided clear technical support.
Very professional engineering team. Good communication, practical advice, and smooth service from start to finish.
The team was genuinely helpful and responsive. They handled our engineering requirements professionally and made the whole process easy.
Plumbing Contracting: questions, answered
Which pipe materials do you install?
PPR, copper and PEX for water supply and uPVC or HDPE for drainage, as specified. We advise where a choice affects cost or lifespan.
How do you test a plumbing installation?
Supply pipework is hydraulically pressure-tested and held; drainage is water or air tested. Results are recorded before concealment.
Can you replace pipework in an occupied building?
Yes, in phases with planned shut-offs agreed with the occupants.
Do you install water heaters and pumps?
Yes, including central hot water plant and booster sets with their controls.
Do you pressure-test before or after the ceiling closes?
Always before — we test and record results while the pipework is still accessible, since a leak found after closure costs far more to fix.
Can you install fire-fighting pipework for civil defence approval?
Yes, installed and tested to the standard civil defence inspection expects, coordinated with the wider fire and life-safety design.
What documentation do we get at handover?
Pressure test records, as-built drawings and equipment manuals for pumps and tanks, so your facilities team has what they need afterward.
Why is water pressure low on upper floors and how is it fixed?
Usually because the booster pump set was undersized, a pressure reducing valve is set wrong, or pipework is too small for the flow. We measure flow and pressure at the pump and the furthest outlet, then fix the cause rather than simply fitting a bigger pump.
Related services
Plumbing Consultant
Water supply, drainage, pump and tank sizing with full calculations.
Read more
MEP Contracting
HVAC, electrical, plumbing and fire fighting installed, tested and commissioned by one team.
Read more
HVAC Contracting
Chillers, AHUs, FCUs, VRF and ductwork installed, balanced and commissioned.
Read more
Ready to talk about your project?
Call +971 524064300, or send us your drawings and we will reply with next steps.