Generator Room Acoustic Services in Dubai
Standby and prime generators are among the loudest equipment on a project. We design for the neighbours and the building.
How do you reduce generator noise?
Generator noise is reduced with an acoustic enclosure or room, attenuators on the air intake and exhaust paths, acoustic louvres and vibration isolation for the engine and pipework. The design must also keep enough airflow for cooling and combustion, so noise control never starves the generator.
Fuel supply to the generator is covered by fuel oil systems, and the room around it by plant room soundproofing.
A generator running at full load produces noise through its casing, air intake, radiator discharge and exhaust. It's easy to solve the noise and create an overheating problem, so airflow and acoustics have to be designed together.
We predict the level at the nearest receiver, design the enclosure and attenuation to meet the target, and check airflow paths against the generator's needs. For the fuel side of the room, see our fuel oil systems work.
What's included
Noise prediction at the nearest receiver
Calculated levels at neighbouring buildings and occupied spaces.
Intake and exhaust attenuator design
Attenuators sized for noise reduction and airflow.
Acoustic louvres and enclosures
Rooms and enclosures that contain casing noise.
Vibration isolation for engines
Mounts and flexible connections that stop vibration reaching the structure.
When to call us
You don't need a finished brief. If any of these sounds familiar, let's talk.
- Neighbours or occupants complain about generator noise.
- You're planning a generator room and need the noise limits met.
- An enclosure is overheating or the noise is still too high.
How we work
Brief and site review
We review drawings, how the space is used and your target, and visit the site where it helps.
Measure and model
We survey existing noise, then model sound levels and reverberation to test the options.
Design and specify
You get treatment details, specifications and schedules ready for tender and construction.
Review and sign-off
We check submittals, support your contractor and verify the result on site.
Where we work
- Data centres
- Hospitals
- Towers and mixed-use
- Industrial facilities
Trusted by teams across Dubai and the UAE
What clients say
See our Google reviewsReally good experience with Solve Tech Vision. Their MEP calculation work was accurate, and the team was easy to communicate with.
Professional MEP consultants in Dubai. They understood our requirements quickly and provided clear technical support.
Very professional engineering team. Good communication, practical advice, and smooth service from start to finish.
The team was genuinely helpful and responsive. They handled our engineering requirements professionally and made the whole process easy.
Generator Room Acoustics questions, answered
Do generator rooms need cooling airflow?
Yes. Airflow paths are a key part of the design, and attenuators must be sized so they control noise without restricting the air the generator needs.
Can you reduce noise from an existing generator?
Usually. We measure it, identify the dominant paths and recommend attenuators, enclosures or isolation that suit the room.
How loud is a standby generator?
A large diesel generator without treatment commonly produces around 95 to 105 dB(A) at one metre, with the exhaust and the radiator fan as the loudest sources. Treatment is designed from the manufacturer's data and the noise limit at the nearest neighbour.
Does the generator need to be quiet only during testing?
It should be treated for both. Weekly or monthly test runs are when neighbours notice it most, but in a power cut it may run for hours. We design for the full-load condition.
Related services
HVAC Acoustics
Quiet air-conditioning through careful selection, ducting and isolation.
Read moreFAHU/AHU Acoustics
Fresh air and air handling units are big noise sources. We keep them from disturbing the spaces around them.
Read more
MEP Contractor
HVAC, electrical and plumbing installed, tested and commissioned by one accountable team.
Read more
Ready to talk about your project?
Call +971 524064300, or send us your drawings and we will reply with next steps.