
MEP Consultant in Dubai
Mechanical, electrical, plumbing and fire fighting design from one desk, with calculations your reviewer can follow line by line.
What does an MEP consultant do?
An MEP consultant designs a building's mechanical, electrical and plumbing systems before anything is installed. That means sizing the cooling, power, water, drainage and fire fighting systems, coordinating them with the architecture and structure, and producing the drawings and calculations authorities and contractors work from.
Each discipline has its own page: HVAC heat load and design, electrical load schedules, plumbing and drainage design and fire fighting design. If you are budgeting, read why MEP calculations matter before you build. Area pages cover local conditions in Al Quoz, Business Bay and JLT.
Most MEP trouble on site starts on paper: a chiller sized by rule of thumb, a riser that was never coordinated, a load schedule that does not match the DEWA application. As an MEP consultant in Dubai we work the numbers first, then draw. Every design leaves our office with the calculation that justifies it, so a reviewer can check the reasoning instead of taking it on trust.
Our MEP design and calculations cover four disciplines, each with its own page: HVAC consultancy, electrical consultancy, plumbing consultancy and fire fighting consultancy. We work in AutoCAD and Revit MEP, and we coordinate with your architect and structural engineer so services fit the building that is actually being built.
Developers, fit-out firms and main contractors use us as their MEP design consultants in Dubai for villas, towers, warehouses and interiors. If you need MEP consultancy for villa and fit-out approvals in Dubai, we prepare the package for DEWA, Dubai Municipality and Civil Defence review and answer the comments that come back. When the design is approved, our MEP contracting team can build it.
MEP Consultant services
Each has its own page with scope, deliverables and common questions.

HVAC Consultant
Heat load calculations, duct and pipe sizing and equipment selection.
Read more
Electrical Consultant
Load schedules, single line diagrams, cable sizing and lighting design.
Read more
Plumbing Consultant
Water supply, drainage, pump and tank sizing with full calculations.
Read more
Fire Fighting Consultant
Sprinkler, hose reel, hydrant and fire pump design with hydraulic calculations.
Read moreWhat's included
Concept and detailed design
Layouts, schematics and schedules for HVAC, electrical, plumbing and fire fighting.
Load and sizing calculations
Cooling loads, electrical demand, pipe and pump sizing, each documented and traceable.
Coordinated drawings
Services overlaid against structure and ceilings, with clashes resolved before site.
Authority submission support
Packages prepared for DEWA, Dubai Municipality and Civil Defence review.
Design review and value engineering
A second pair of eyes on a design you already have, with savings identified.
Tender and site support
BOQs, technical queries and shop-drawing review while the work is built.
When to call us
You do not need a finished brief. If any of these sounds familiar, let's talk.
- You have architectural drawings and need a full MEP design to go with them.
- An authority or client reviewer has sent back comments you need answered properly.
- You suspect the existing design is oversized and want it checked before you buy equipment.
How we work
Brief and survey
We review drawings, visit the site where needed and agree the scope and the standard to design to.
Calculate
We run the calculations and record the inputs and assumptions so they can be checked.
Design and document
Drawings, schedules and a clear report, issued for your review.
Support through approval and site
We answer review comments and stay available while the work is built.
Where we work
- Villas and residential
- Offices and commercial buildings
- Hotels and hospitality
- Healthcare
- Warehouses and industrial units
- Mixed-use developments
Areas we cover in Dubai
Trusted by teams across Dubai and the UAE
What clients say
See our Google reviewsReally good experience with Solve Tech Vision. Their MEP calculation work was accurate, and the team was easy to communicate with.
Professional MEP consultants in Dubai. They understood our requirements quickly and provided clear technical support.
Very professional engineering team. Good communication, practical advice, and smooth service from start to finish.
The team was genuinely helpful and responsive. They handled our engineering requirements professionally and made the whole process easy.
MEP Consultant: questions, answered
What is the difference between an MEP consultant and an MEP contractor?
The consultant designs and specifies the systems; the contractor installs, tests and commissions them. We do both, as separate services, so you can appoint us for design only, installation only, or the two together.
Which software do you use for MEP design?
AutoCAD and Revit MEP for drawings and coordination, with dedicated tools for load, lighting and hydraulic calculations. We deliver in the format your project team already uses.
Can you take over a design another consultant started?
Yes. We review what exists, tell you what can be kept, and complete or correct the rest. You get a short written review before we change anything.
How long does MEP design take for a villa or a fit-out?
A typical villa or office fit-out takes a few weeks from complete architectural drawings, depending on how many revisions the layout goes through. We give a programme with the quote.
Which authorities approve MEP drawings in Dubai?
That depends on the project. Electrical works go through DEWA, fire and life-safety through Civil Defense and building permits through Dubai Municipality. We confirm the route for your project at the start.
Do you work in BIM?
Yes. We use Revit MEP for coordinated models and produce 2D drawings from the model for approval and construction.
Can you design from architectural concept drawings?
Yes. We can start at concept stage, which is usually the best time, because major decisions about plant space and risers are still open.
Can you provide only the calculations?
Yes. Some clients need calculations for a submission or to check another designer's work. We can provide those on their own.
What drawings does an MEP design package for a Dubai fit-out include?
A typical fit-out package has HVAC layouts with duct and diffuser sizes, electrical power and lighting layouts with the load schedule and single line diagram, plumbing and drainage layouts, fire fighting and fire alarm layouts where the scope needs them, plus the calculations behind each one. The landlord and the relevant authority review these before work starts.
Can the same company design and install the MEP works?
Yes. Solve Tech Vision can be appointed for design only or for design and build. When our MEP contracting team installs a design we prepared, site questions go straight to the engineer who drew it, which shortens the approval and snagging stages.
Related services

MEP Contracting
HVAC, electrical, plumbing and fire fighting installed, tested and commissioned by one team.
Read more
Industrial Automation Consultant
Control systems designed, installed, commissioned and supported.
Read more
ELV Consultant
CCTV, access control, fire alarm, structured cabling and PA system design.
Read more
Ready to talk about your project?
Call +971 524064300, or send us your drawings and we will reply with next steps.

















